only one name means protektion? www.protekdevices.com 05173.r7 9/10 page 1 05173 plc03-3.3 high power low capacitance tvs array d escription the plc03-3.3 is a low capacitance, high powered tvs array available in a so-8 package. this device is designed to protect high speed data line applicatons from the damaging efects of esd, eft and secondary transient threats. the plc03-3.3 has a peak pulse power ratng of 1800 wats for an 8/20s waveshape. this devices meets the iec 61000-4-2, iec 61000-4-4 and iec 61000-4-5 requirements. f eat u res ? compatble with iec 61000-4-2 (esd): air - 15kv, contact - 8kv ? compatble with iec 61000-4-4 (eft): 40a - 5/50ns ? compatble with iec 61000-4-5 (surge): 94a, 8/20s - level 4(line- gnd), 48a, level 1 (power) & 48a, level 4(line-line) ? 100a (2/10s) per bellcore gr1089 (intra-building) ? esd protecton > 25 kilovolts ? 1800 wats peak pulse power per line (tp = 8/20s) ? low capacitance: 8pf typical ? telecom/diode bridge ? rohs compliant ? reach compliant m echanical characteristics ? molded jedec so-8 package ? approximate weight: 70 milligrams ? lead-free pure-tin platng (annealed) ? solder refow temperature: pure-tin - sn, 100: 260-270c ? 12mm tape and reel per eia standard 481 ? flammability ratng ul 94v-0 applications ? t1/e1 line cards ? isdn u-interfaces & isdn s/t interfaces ? xdsl interfaces ? ethernet 10/100/1000 base t ? set top box interface pin config u ration so-8 pac k age 1 2 4 8 3 5 6 7
only one name means protektion? www.protekdevices.com 05173.r7 9/10 page 2 05173 plc03-3.3 typical device characteristics maxim u m ratings @ 25c u nless otherwise specifed parameter symbol val u e u nits operatng temperature t l -55 to 150 c storage temperature t stg -55 to 150 c peak pulse power (tp = 8/20s) - see figure 1 p pp 1800 wats electrical characteristics per line @ 25c u nless otherwise specifed part n u mber device mar k ing rated stand-off voltage v wm volts minim u m snapbac k voltage @50 m a v (br) volts maxim u m clamping voltage (fig. 2) (note 1-2) @ 8/20 s v c @ i pp maxim u m clamping voltage (line-gnd) @ 8/20 s @i p = 50a v c volts maxim u m lea k age c u rrent @v wm i d a maxim u m capacitance (note 3) @0v, 1mh z c p f maxim u m capacitance (note 4) @0v, 1mh z c p f plc03-3.3 pbc 3.0 2.8 18.0v@100.0a 11 2.0 25 12 notes 1. for an 8/20s waveform, apply positve pulse to pin 1 or 8 to pin 2 or 3 (ground). 2. measured between pin 1 or 8 to pin 2 or 3. 3. measured between i/o pins and ground (pin 1 to 2). 4. measured between i/o pins (pin 1 to 4).
only one name means protektion? www.protekdevices.com 05173.r7 9/10 page 3 05173 plc03-3.3 typical device characteristics fig u re 1 pea k p u lse power vs p u lse time t d - pulse duraton - s 1800w, 8/20s waveform 0.1 1 10 100 1,000 10,000 p pp - peak pulse power - kilowats 0.1 1 10 100 peak pulse power 8/20s average power fig u re 3 power derating c u rve t a - ambient temperature - c 0 25 50 75 100 125 150 0 20 40 60 80 100 % of rated power test waveform parameters t f = 8s t d = 20s t f e -t peak value i pp t d = t/(i pp /2) fig u re 2 p u lse wave form t - time - s 0 5 10 15 20 25 30 i pp - peak pulse current - % of i pp 0 20 40 60 80 100 120
only one name means protektion? www.protekdevices.com 05173.r7 9/10 page 4 05173 plc03-3.3 so-8 pac k age information o u tline dimensions dim millimeters inches min max min max a 4.80 5.00 0.189 0.196 b 3.80 4.00 0.150 0.157 c 1.35 1.75 0.054 0.068 d 0.35 0.49 0.014 0.019 f 0.40 1.25 0.016 0.049 g 1.27 bsc 0.05 bsc j 0.18 0.25 0.007 0.009 k 0.10 0.25 0.004 0.008 p 5.80 6.20 0.229 0.244 r 0.25 0.50 0.010 0.019 notes 1. -t- = seatng plane and datum surface. 2. dimensions a and b are datum. 3. dimensions a and b do not include mold protrusion. 4. maximum mold protrusion is 0.015 (0.380mm) per side. 5. dimensioning and tolerances per ansi y14.5m, 1982. 6. dimensions are exclusive of mold fash and metal burrs. pad layo u t dimensions dim millimeters inches min max min max a 1.14 1.40 0.045 0.055 b 0.64 0.89 0.025 0.035 c 6.22 - 0.245 - d 3.94 4.17 0.155 0.165 e 1.02 1.27 0.040 0.050 notes 1. controlling dimension: inches. -a- 8 5 1 4 -b- p g d -t - c k j r x 45 0 - 10 f 4 pl 0.010 (0.25mm) m b + 8 pl 0.010 (0.25mm) b + a t a b c d e m m s s
only one name means protektion? www.protekdevices.com 05173.r7 9/10 page 5 05173 plc03-3.3 tape and reel user directon of feed t k0 a0 p d p0 p2 e b0 f w 10 pitches cumulatve tolerance on tape 0.2 pin 1 ordering information base part n u mber leadfree s u ffix tape s u ffix qty/reel reel size t u be qty plc03-3.3 -lf -t7 1,000 7 98 plc03-3.3 -lf -t13 2,500 13 98 specifications r eel d ia . t ape w idth a0 b0 k 0 d e f w p0 p2 p tmax 178mm (7) 12mm 6.50 0.10 5.40 0.10 2.00 0.10 1.50 0.10 1.75 0.10 5.50 0.05 12.00 0.30 4.00 0.12 2.00 0.10 4.00 0.10 0.25 n otes 1. dimensions are in millimeters. 2. surface mount product is taped and reeled in accordance with eia-481. 3. sufx - t7 = 7 reel - 1,000 pieces per 12mm tape. 4. sufx - t13 = 13 reel - 2,500 pieces per 12mm tape. 5. bulk product shipped in tubes of 98 pieces per tube. 6. marking on part - marking code (see page 2), date code, logo and pin one defned by dot on top of package. package outline, pad layout and tape specifcatons per document number 06011.r4 8/10.
only one name means protektion? www.protekdevices.com 05173.r7 9/10 page 6 05173 plc03-3.3 company information company profile protek devices, based in tempe, arizona usa, is a manufacturer of transient voltage suppression (tvs) products designed specifcally for the protecton of electronic systems from the efects of lightning, electrostatc discharge (esd), nuclear electromagnetc pulse (nemp), in - ductve switching and emi/rfi. with over 25 years of engineering and manufacturing experience, protek designs tvs devices that provide applicaton specifc protecton solutons for all electronic equipment/systems. protek devices analog products division, also manufactures analog interface, control, rf and power management products. copyright ? protek devices 2007 - this literature is subject to all applicable copyright laws and is not for resale in any manner. specifications: protek reserves the right to change the electrical and or mechanical characteristcs described herein without notce. design changes: protek reserves the right to discontnue product lines without notce and that the fnal judgement concerning selecton and specifcatons is the buyers and that in furnishing engineering and technical assistance. protek assumes no responsibility with respect to the selecton or specifcatons of such products. protek makes no warranty, representaton or guarantee regarding the suitability of its products for any partcular purpose, nor does protek assume any liability arising out of the applicaton or use of any product or circuit and specifcally disclaims any and all liability without limitaton special, consequental or incidental damages. life support policy: protek devices products are not authorized for use in life support systems without writen consent from the factory. contact us corporate headquarters 2929 south fair lane tempe, arizona 85282 usa by telephone general: 602-431-8101 sales: 602-414-5109 customer service: 602-414-5114 by fax general: 602-431-2288 by e-mail: sales: sales@protekdevices.com customer service: service@protekdevices.com technical support: support@protekdevices.com web www.protekdevices.com www.protekanalog.com
|
